Close

7.3 CNCFAB SD Replacement HPOP Lines

$ 135.00

SKU:

Availability: In stock

Brand: CNCFAB

-
+
Have questions about a product?
Email us at Sales@kcturbos.net

These lines are to replace the typical high mileage expensive leaky oem hpop lines that have the ford stc fittings. Kit comes with two hoses and all necessary fittings to eliminate the quick connect fittings (stc) on the heads and the hpop itself.  These new fittings are the same as those used on the 94.5-97 powerstroke engines. Hoses are up-sized to 3/8″, using top of the line aeroquip hose utilizing dupont teflon lining with a burst pressure rating of 16,000psi and working temperature rating of 400*f.   Nominal working pressure is 5000psi @ 72*f and 3000psi @ 400*f (if your engine oil is this hot, you have bigger issues to worry about).

NOTE:  IF YOU ARE UNSURE OF INSTALLING THESE LINES YOURSELF, PLEASE SEEK OUT A COMPETENT AND QUALIFIED TECHNICIAN TO INSTALL THE LINES.  ALSO, WHEN INSTALLING, THE DISC CHECK VALVES BEHIND THE HPOP FITTINGS NEED TO BE REMOVED. THEY ARE NOT NEEDED.   IF YOU HAVE THE PROPER TOOLS TO CHECK TORQUE, THE FITTINGS ARE TO BE SET TO 28FT/LBS. 

Shipping policy: Many of our products are made to order so we do our best to ship within 48 business hours of receiving payment for your purchase.  We will notify you if there is going to be some sort of delay.

Return policy: We offer a 100% satisfaction guarantee.  If you have any sort of issue with your purchase then please contact us so we can make it right.

All KC Turbo brand products have a 1 year warranty. The warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. If damage is done due to improper care of the purchaser's vehicle, warranty is void.  Warranty's are non-transferable and are only offered to the original purchaser.